|
|
|
Step 1: How to Measure For
Your Door
Roll Up
Door. Call 1-877-RLDOORS.
Click Here For A PDF Drawing.
Please measure your finished
frame width (rough opening
width) and finished frame height
(rough opening height). Our
doors will be larger than these
sizes but this is the size of
door you need to order.
A: Measure the finished frame
width of the opening at the
widest point. This is the
distance between the right and
left sides of the finished
opening. Look for general
irregularities, such as jambs
which are not square.
B: Measure the finished frame
height of the opening at the
highest point. This is the
distance between the floor and
the top of the finished opening.
Look for general irregularities,
such as un-level floor.
C: Measure the width of the
areas beside the openings.
Between 4" and 6" is required on
each side for installation of
the vertical track.
D: Measure the area between the
top of the door opening and the
ceiling (or to the lowest
obstruction at ceiling). Between
15" and 23" is required above
the header height for
installation of the roll up
door. See headroom requirements
in
Step 2: How Much Room Do I Need.
Additional items to observe:
Verify electrical outlet for
door opener use.
Note any lights or stairs in the
way.
Verify all jambs are in good
condition, header is stable.
Verify the level of the floor.
Was the previous door a custom
fit?
Note any pipes, ductwork, etc.
above the door that might
obstruct operation of the door.
Roll Up
Doors, Commercial Doors, Garage Doors
Provided nation wide by Roll Up Doors Direct
1-352-243-0180. GET MORE FOR LESS $$$
Roll Up Doors Direct
www.RollUpDoorsDirect.Com
|
